DIMENSIONS
| d | 20 mm | Bore diameter |
|---|
| d1 | ≈28.2 mm | Shoulder diameter inner ring |
|---|
| A | 34 mm | Base width |
|---|
| A1 | 23 mm | Top width |
|---|
| B | 31 mm | Width inner ring |
|---|
| B4 | 4.5 mm | Distance from locking device side face to thread centre |
|---|
| H | 33.3 mm | Height of spherical seat centre |
|---|
| H1 | 13.5 mm | Foot height |
|---|
| H2 | 64.5 mm | Overall height |
|---|
| J | 95 mm | Distance between attachment bolts |
|---|
| J | max.100 mm | Distance between attachment bolts |
|---|
| J | min.90 mm | Distance between attachment bolts |
|---|
| L | 127 mm | Overall length |
|---|
| N | 13 mm | Diameter of attachment bolt hole |
|---|
| N1 | 18 mm | Length of attachment bolt hole |
|---|
| s1 | 18.3 mm | Distance from locking device side face to raceway centre |
|---|
THREADED HOLE| RG | 1/4-28 UNF | Housing thread for the grease fitting |
|---|
| R1 | 2 mm | Axial position of the housing thread |
|---|
| Rα | 45 ° | Angular position of the housing thread |
|---|
GREASE FITTING| DN | 6.6 mm | Diameter of head sphere of grease fitting |
|---|
| SWN | 7.94 mm | Hexagonal key size for the grease fitting |
|---|
| GN | 1/4-28 UNF | Thread of the grease fitting |
|---|
CALCULATION DATA
| Basic dynamic load rating | C | 12.7 kN |
|---|
| Basic static load rating | C0 | 6.55 kN |
|---|
| Fatigue load limit | Pu | 0.28 kN |
|---|
| Limiting speed | | 6 500 r/min |
|---|
with shaft tolerance h6 |
MOUNTING INFORMATION
| Set screw | G2 | M6x0.75 |
|---|
| Hexagonal key size for set screw | | 3 mm |
|---|
| Recommended tightening torque for set screw | | 4 N·m |
|---|
| Recommended diameter for attachment bolts, mm | G | 10 mm |
|---|
| Recommended diameter for attachment bolts, inch | G | 0.375 in |
|---|
